Liquid Level Sensor

Product series: HBLT-Flex

HBLT-flex is a sensor for measurement of liquid level in gas applicable in HC, HFC, HFO & CO2. HBLT-flex is a capacitive sensor suited for industrial refrigeration systems and similar applications. The sensor has an output signal of 4-20 mA, which is proportional with 0 and 100%.
HBLT-flex can be adjusted in length to fit the current application. The sensor element consists of a 4 mm steel wire with aluminum pipe elements and plastic washers. The sensor can be supplied up to 2 m length and can be shortened to fit the application. The sensor must be installed in a pipe with a diameter between 25 and 32 mm (1”-1 ¼”) to get sufficient sensitivity. HBLT-flex can be used in connection with the HBLT-C1 controller for controlling pumps, etc., or it can be configured to directly control a valve without the need for another controller.

Click to enlarge image 1503405969HBLT-FLEX_web1.jpg

Click to open image!

Click to open image!

View the embedded image gallery online at:
https://www.hbproducts.cmsjoomla.dk/en/products-link3/liquid-level-sensor/level-co2-butane-isobutane-propane/item/917#sigProId040b05e92f

Product features
Applications
Specifications
Ordering code
Downloads

Product features

	Can be used in compact systems where installation height is low
	Flexible sensor, which is adjustable to a length of 0 to 2000 mm in steps of 50 mm.
	Designed for the refrigeration industry - max. pressure up to 100 bar.
	Split design which makes the sensor easy to install and service. The electronic part can easily be separated from the mechanical part by loosening the threaded union.
	Simple calibration for the specified length.
	Can be used for marine applications, since measurement is not affected by contact with the metal surface of the overflow pipe.

Applications

HBLT FLEX in standpipe Small

Specifications

Connection diagram

HBLC web 1

The sensor can be programmed to either emit a linear signal, which is identical to the tank level, or to regulate a valve for the purpose of obtaining the same level in the tank (float valve).

Drawing

HBLT FLEX MECHANICAL DIMENSIONS

Power supply
Voltage	24 AC/DC + 10%
Max. possible resistance	500 ohm
Max consumption	600 mA
Plug connection	DIN 0627 - 5 pins
Output
Analog output	4-20 mA, 1 A
Transsistor output - alarm	PNP, 1 A
Contact function - alarm	NO/NC (Programmable)
Environmental conditions
Ambient temperature	-30...+50°C
Max. pressure	100 bar
Protection degree	IP65
Vibrations	IEC 68-2-6 (4g)
Mechanical specifications
Thread connections	3/4” NPT
Adapter - 3/4" NPT / 1" BSPP (option)	HBS/ADAP/8/2
Size	Se dimensional drawing
Material - liquid parts	AISI 304 / PTFE
Material - electronic parts	Plast
House type	Angle
Approvals
EMC-Emission	EN 61000-3-2
EMC-Immunity	EN 61000-4-2
Cable
HBxC-M12/5	5 m - 5 wire
Indication
LED indication	Green, yellow & Red LED
Configurations
Configuration	PC tool

Ordering code

300 mm / 3/4" NPTHBLT-Flex-3-2 300 mm / 3/4" BSPPHBLT-Flex-3-6 600 mm / 3/4" NPTHBLT-Flex-6-2 600 mm / 3/4" BSPPHBLT-Flex-6-6 800 mm / 3/4" NPTHBLT-Flex-8-2 800 mm / 3/4" BSPPHBLT-Flex-8-6 900 mm / 3/4" NPTHBLT-Flex-9-2 900 mm / 3/4" BSPPHBLT-Flex-9-6 1200 mm / 3/4" NPTHBLT-Flex-12-2 1200 mm / 3/4" BSPPHBLT-Flex-12-6 1400 mm / 3/4" NPTHBLT-Flex-14-2 1400 mm / 3/4" BSPPHBLT-Flex-14-6 Electronic part for HBLT-FLEXHBLT-FLEX-EL

Downloads

Quick guide - Installation - HBLT-Flex

Instruction manual - HBLT-Flex

Leaflet

We develop advanced sensors for:

Useful info