We develop advanced sensors for:

Industrial refrigeration
01
Commercial Refrigeration
02
Heat pumps
03

Controller - Brine Leakage

Technical data: HBPH-C1

HBPH-C1 is a display designed for connection with the HBPH-MK2-LT sensor. In the display, it is possible to calibrate and set up the alarm limit. The display is provided in a version for installation into the front of a panel, as well as a version built into the cabinet. The cabinet version has a 110/240 V supply and can be installed either indoors or outdoors.

The sensor is supplied with a M12 female connector used for connecting the pH sensor and a 5 m M12 supply cable.

Shop image

Product features

Display with programmable settings from the front of the display
Displaying pH level - 0...100 % as well as alarm indication for high level
24 V AC/DC power supply
Available in cabinet for 110/240 V AC supply

Specifications

Connection diagram

Drawing

HBLT C1

HBLT C1 ENC 

 

Power supply
Power supply24 AC/DC + 10%
Current consumptionMax 600 mA
Electronic connectionsScrew terminals
Wiring size2,5 mm2
Input
Analog input - sensor4-20 mA
Analog input - feedback4-20 mA
Relay functionAlarm - max level
Relay voltage5-25 VDC
Output
Analog output4-20 mA
Load3A/24VDC
Relay ouput@24VAC / DC: 3A @110 VAC. 5A @240 VAC: 5A
Environmental conditions
Ambient temperature-20...+70 °C
Protection degree - front mountedIP45
Humidity20...80 %
Mechanical specifications
InstallationFront of panel
Measure96x96x115 mm
Cutting dimension in panel92,8x92,8 mm
MaterialePlastic
Approvals
EMCEN61000
Display
DisplayRed LED, 3 digits
AlarmGreen and red LED
ProgrammingFrom front
Update frequency1 Hz

Ordering code

Display for pH sensor - 24 V DC power supplyHBPH-C1 Display for pH sensor built-in a cabinet and with a 110/240 V power supply installedHBPH-C1-ENC

Downloads