NH3 Gasmelder

Product Series: HBGS

HBGS fulfils the requirements for gas leakage measurement in accordance HBGS fulfils the requirements for gas leakage measurement in accordance with F-GAS regulation EU/517/2014. HBGS detects NH3 (R717) in a range of 0…1000 ppm. It is an independent unit that must be supplied with 24 V DC. It has 3 built-in digital alarm outputand 1 analog 4… 20 mA output. The sensor can be set up using a PC with the HB Configuration Tool.The sensor element has a lifetime of 2 years and can easily be replaced. On the front, you can find 4 integrated LEDs for displayof the supply (green) as well as 3 alarm levels (red, orange, and yellow). Similarly, there is a reset button in case an alarm is triggered.The sensor is factory calibrated. Verification during the lifetime can be done with high gas concentrations. The sensor is optimized for use in areas where cleaning solvent are used.optimized for use in areas where cleaning solvent are used.Built-in heating element ensures low ambient temperatures down to -30 ° C.The sensor comes with a calibration certificate as well as with preconfigured alarm limits.